logo

รายละเอียดสินค้า

Created with Pixso. บ้าน Created with Pixso. ผลิตภัณฑ์ Created with Pixso.
อุปกรณ์เสริมการทดสอบมิเตอร์
Created with Pixso.

HF301 Electric Energy Meter Photoelectric Sampler

HF301 Electric Energy Meter Photoelectric Sampler

ชื่อแบรนด์: GENY
เลขรุ่น: HF301
ขั้นต่ำ: 1
ราคา: negotiate rates
เงื่อนไขการจ่ายเงิน: T/T, L/C, D/P, T/T
ความสามารถในการจําหน่าย: 100 ชิ้น / 1 เดือน
ข้อมูลรายละเอียด
สถานที่กำเนิด:
จีน
ได้รับการรับรอง:
ISO, CE
พิมพ์:
อุปกรณ์เสริมการทดสอบมิเตอร์
แรงดันไฟฟ้า:
กระแสตรง 4.5–6 โวลต์
การใช้พลังงาน:
≤ 0.35 วัตต์ (ไม่มีโหลด)
ระยะการสุ่มตัวอย่าง:
1.0–2.0 มม
กระแสเอาต์พุต:
3–5 มิลลิแอมป์
ความถี่การสุ่มตัวอย่าง:
200 เฮิร์ต
รายละเอียดการบรรจุ:
เคสไม้อัด
สามารถในการผลิต:
100 ชิ้น / 1 เดือน
เน้น:

HF301 electric energy meter

,

photoelectric sampler meter

,

meter testing accessory with warranty

คําอธิบายสินค้า
HF301 Electric Energy Meter Photoelectric Sampler
Main Features
  • Compact size, stable and reliable operation, suitable for use with electric energy meter calibration devices.
  • Uses imported receiver components with strong anti-interference capability.
  • High sampling/reception frequency up to 200 Hz, fully meeting the requirements of various meters.
Operating Instructions
  • When collecting signals from a mechanical electric energy meter, turn on the red switch on the controller and align the sampler with the surface of the mechanical meter so that the light beam points at the meter's rotating disc.
  • Connect the power. The green LED will stay on. Adjust the potentiometer until the red LED for pulse output lights up; then turn the potentiometer in the opposite direction until, when there is no black mark on the meter's disc, the red signal LED just turns off. When the black mark arrives, the signal indicator LED should light up (indicating signal output). At this point, the adjustment is complete.
  • When receiving the LED pulse signal indicator from an electronic energy meter, press the red button on the controller to turn off the LED of the emitting sampling component. Align the center receiving tube with the meter's LED pulse signal indicator. (Follow the same steps as in item 2 thereafter.)
Technical Specifications
Parameter Value
Operating voltage DC 4.5-6 V
Operating current ≤ 50 mA (measured at 5 V supply)
Power consumption ≤ 0.35 W (no load)
Sampling distance 1.0-2.0 mm
Output signal High level ≥ 4.5 V (no black mark), Low level ≤ 0.2 V (with black mark)
Output current 3-5 mA
Anti-interference Debounce tolerance ≤ 2.0 mm
Sampling frequency 200 Hz
HF301 Electric Energy Meter Photoelectric Sampler 0